Everybody says that Linux is secure by default, and to some extent, this is agreed upon (it’s a debatable topic). However, Linux has an in-built security model in place by default.

You need to tune and customize it according to your needs, which can help in making the system more secure. Linux is more challenging to manage but offers greater flexibility and configuration options.

Securing a system in production from the hands of hackers and crackers is a challenging task for a System Administrator. This is our first article related to “How to Secure Linux box” or “Hardening a Linux Box“.

In this post, we’ll explain 25 useful tips and tricks to secure your Linux system. Hope, below tips and tricks will help you some extend to secure your system.

1. Physical System Security – Setting a GRUB Password

One effective way to enhance security is by setting a GRUB password, which is a boot loader used by most Linux distributions to load the operating system when the computer starts up.

By setting a GRUB password, you add an extra layer of defense against unauthorized users who might attempt to tamper with or gain unauthorized access to your system.

Log into your Linux server and open the GRUB configuration file, which is located in different paths as shown.

  • For Ubuntu/Debian: /etc/default/grub
  • For CentOS/RHEL: /etc/grub2.cfg or /boot/grub/grub.cfg

Next, use a text editor like nano or vi to edit this file with root privileges (sudo).

Look for the line that starts with GRUB_CMDLINE_LINUX or similar and append GRUB_PASSWORD=<password> to the end of this line.

GRUB_CMDLINE_LINUX="quiet splash"
GRUB_PASSWORD=password123

After editing the configuration file, update GRUB to apply the changes.

sudo update-grub   # For Ubuntu/Debian
sudo grub2-mkconfig -o /boot/grub2/grub.cfg    # For CentOS/RHEL 7
sudo grub2-mkconfig -o /boot/grub/grub.cfg     # For CentOS/RHEL 8

Restart your server to apply the GRUB password.

sudo reboot

2. Creating Different Partitions for Higher Data Security

It’s important to have different partitions to obtain higher data security in case any disaster happens. By creating different partitions, data can be separated and grouped.

When an unexpected accident occurs, only data from that partition will be damaged, while the data on other partitions will survive. Make sure you have the following separate partitions and that third-party applications should be installed on separate file systems under /opt.

/
/boot
/usr
/var
/home
/tmp
/opt

Most Linux distributions allow you to create and configure partitions during the installation process using the guided or manual partitioning options.

Post-installation, you can use tools like fdisk, parted, or graphical tools like GParted to create and manage partitions.

Example using fdisk:

sudo fdisk /dev/sda

Follow the prompts to create new partitions and assign them to the appropriate file systems.

3. Minimize Packages to Minimize Vulnerability: Remove Unwanted Services

One of the key strategies in securing a Linux system is to minimize the number of installed packages and running services. Each package and service can potentially introduce vulnerabilities, so keeping your system lean and efficient is a crucial step in hardening your server.

Start by identifying the packages and services that are not needed for your server’s specific function, which can be done using package management tools such as dpkg or rpm and service management utilities.

dpkg --list    # For Debian-based systems
rpm -qa        # For Red Hat-based systems
systemctl list-units --type=service --state=running

Once you have identified the unnecessary packages, you can remove them using your package manager such as apt or yum.

sudo apt remove package_name    # For Debian-based systems
sudo yum remove package_name    # For Red Hat-based systems

After removing the unwanted packages, the next step is to disable and stop services that are not needed.

sudo systemctl stop service_name
sudo systemctl disable service_name

4. Check Listening Network Ports in Linux

Monitoring and managing network ports is a crucial aspect of securing a Linux system and knowing which ports are open and listening can help you identify potential vulnerabilities and ensure that only necessary services are accessible.

To check network ports, we will use netstat or ss command-line tools, which provide various network-related information, including open ports and listening services.

sudo netstat -tuln
OR
sudo ss -tuln

5. Use Secure Shell (SSH) for Enhanced Security

Secure Shell (SSH) is a widely used protocol that offers a secure way to access and manage your Linux servers. However, to maximize security, there are several best practices you should follow, such as disabling root login, allowing only specific users, using SSH protocol 2, and changing the default SSH port.

Disabling root login forces users to log in with their user accounts, providing better accountability and reducing the risk of unauthorized access.

sudo nano /etc/ssh/sshd_config

Find the line that says PermitRootLogin and change its value to no:

PermitRootLogin no

Restricting SSH access to specific users adds a layer of security by ensuring that only authorized users can log in.

Add a line at the end of the file to specify the allowed users:

AllowUsers user1 user2

Changing the default SSH port (22) to a non-standard port can help reduce the number of automated attacks on your server.

Port 2222

Restart the SSH service to apply the changes:

sudo systemctl restart sshd

6. Keep Your System Up-to-Date

Regularly update your Linux distribution and all installed packages to the latest security patches and bug fixes using your system default package manager, such as apt for Debian-based distributions or yum for Red Hat-based systems.

sudo apt update    # For Debian-based systems
sudo yum update    # For Red Hat-based systems

7. Managing Cron Job Permissions

Cron is a powerful utility in Unix-like operating systems that allows users to schedule jobs to run at specific intervals.

However, there might be situations where you need to control who can or cannot create and run cron jobs on your system. Cron has built-in features to manage these permissions using the /etc/cron.allow and /etc/cron.deny files.

To allow specific users to use cron, edit /etc/cron.allow file and the usernames of the users you want to deny, one per line.

user1
user2

To deny specific users to use cron, edit /etc/cron.deny file and the usernames of the users you want to allow, one per line.

user3
user4

To completely disable all users from using cron, you can add the ALL line to the /etc/cron.deny file.

ALL

8. Disable USB Storage Detection

Many times it happens that we want to restrict users from using USB stick in systems to protect and secure data from stealing.

Create a file ‘nano /etc/modprobe.d/no-usb.conf‘ and adding the below line will not detect USB storage.

blacklist usb_storage

After creating the blacklist file, update the initramfs (initial RAM filesystem) to ensure the blacklisted module is not loaded during the boot process:

sudo update-initramfs -u

Reboot your system for the changes to take effect.

9. Turn on SELinux Protection

Security-Enhanced Linux (SELinux) is a compulsory access control security mechanism provided in the kernel. Disabling SELinux means removing the security mechanism from the system. Think twice carefully before removing it, if your system is attached to the internet and accessed by the public, then think some more about it.

SELinux provides three basic modes of operation and they are.

  • Enforcing: This is the default mode that enables and enforces the SELinux security policy on the machine.
  • Permissive: In this mode, SELinux will not enforce the security policy on the system, only warn and log actions. This mode is very useful in terms of troubleshooting SELinux-related issues.
  • Disabled: SELinux is turned off.

You can view the current status of SELinux mode from the command line using ‘system-config-selinux‘, ‘getenforce‘, or ‘sestatus‘ commands.

# sestatus

If it is disabled, enable SELinux using the following command.

# setenforce enforcing

It also can be managed from the ‘/etc/selinux/config‘ file, where you can enable or disable it.

10. Removing X Desktops on a Linux Server

There is no need to run X Window desktops like KDE, GNOME, or XFCE on your dedicated LAMP server. You can remove or disable them to increase the security of the server and performance.

Before removing any desktop environment, identify which one is installed on your server.

dpkg -l | grep desktop
OR
yum grouplist | grep -i desktop

Once identified, you can remove the desktop environment along with any associated packages.

Remove GNOME Desktop Environment:

sudo apt-get purge gnome-shell gnome-session gnome-terminal   # For Debian-based systems
sudo yum groupremove "GNOME Desktop Environment"              # For Red Hat-based systems

Remove KDE Plasma Desktop Environment:

sudo apt-get purge kde-plasma-desktop                       # For Debian-based systems
sudo yum groupremove "KDE Plasma Workspaces"                 # For Red Hat-based systems

Remove Xfce Desktop Environment:

sudo apt-get purge xfce4                                    # For Debian-based systems
sudo yum groupremove "Xfce"                                  # For Red Hat-based systems

If your server also has the X Server installed, which is the display server system for GUIs, you can remove it to further reduce potential security risks.

sudo apt-get purge xserver-xorg-core xserver-xorg              # For Debian-based systems
sudo yum remove xorg-x11-server-Xorg xorg-x11-server-common   # For Red Hat-based systems

Ensure that the server boots into a text-based console rather than starting a graphical desktop environment.

sudo systemctl set-default multi-user.target    # For systemd-based systems
sudo systemctl set-default graphical.target     # To revert back to graphical mode if needed

After removing the desktop environment and optionally the X Server, reboot your server to apply the changes.

11. Disabling IPv6 Protocol on a Linux Server

If you’re not using an IPv6 protocol, then you should disable it because most of the applications or policies do not require IPv6 protocol and currently, it isn’t required on the server.

You need to edit the network configuration file to disable IPv6.

sudo nano /etc/sysctl.conf

Add the following lines to the end of the file:

# Disable IPv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1

Next, apply the changes to the running system.

sudo sysctl -p

Verify that IPv6 is disabled by checking the network interfaces and configuration.

ip addr show

You should see only IPv4 addresses assigned to your network interfaces. IPv6 addresses should not be present.

12. Restricting Users from Using Old Passwords on Linux

This is very useful if you want to disallow users to use the same old passwords. The old password file is located at /etc/security/opasswd. This can be achieved by using the PAM module.

Open the ‘/etc/pam.d/system-auth‘ file under RHEL / CentOS / Fedora.

# vi /etc/pam.d/system-auth

Open the ‘/etc/pam.d/common-password‘ file under Ubuntu/Debian/Linux Mint.

# vi /etc/pam.d/common-password

Add the following line to the ‘auth‘ section.

auth        sufficient    pam_unix.so likeauth nullok

Add the following line to the ‘password‘ section to disallow a user from re-using the last 5 passwords of his or her.

password   sufficient    pam_unix.so nullok use_authtok md5 shadow remember=5

Only the last 5 passwords are remembered by the server. If you try to use any of the last 5 old passwords, you will get an error like.

Password has been already used. Choose another.

13. How to Check Password Expiration of User

In Linux, the user’s passwords are stored in a ‘/etc/shadow‘ file in an encrypted format. To check the password expiration of users, you need to use the ‘chage‘ command, which displays information on password expiration details along with the last password change date. These details are used by the system to decide when a user must change his/her password.

To view any existing user’s aging information such as expiry date and time, use the following command.

#chage -l username

To change the password aging of any user, use the following command.

#chage -M 60 username
#chage -M 60 -m 7 -W 7 userName

Break down of the command:

  • -M Set the maximum number of days
  • -m Set the minimum number of days
  • -W Set the number of days of warning

14. Lock and Unlock the Account Manually

The lock and unlock features are very useful, instead of removing an account from the system, you can lock it for a week or a month. To lock a specific user, you can use the following command.

passwd -l accountName

Note : The locked user is still available for the root user only. The locking is performed by replacing the encrypted password with an (!) string. If someone tries to access the system using this account, he will get an error similar to below.

su - accountName
This account is currently not available.

To unlock or enable access to a locked account, use the command as. This will remove the (!) string with an encrypted password.

passwd -u accountName

15. Enforcing Stronger Passwords

Many users use soft or weak passwords and their passwords might be hacked with dictionary-based or brute-force attacks.

The ‘pam_cracklib‘ module is available in the PAM (Pluggable Authentication Modules) module stack which will force users to set strong passwords.

Open the following file with an editor.

vi /etc/pam.d/system-auth

And add a line using credit parameters such as (lcredit, ucredit, dcredit, and/or ocredit respectively lower-case, upper-case, digit, and other)

/lib/security/$ISA/pam_cracklib.so retry=3 minlen=8 lcredit=-1 ucredit=-2 dcredit=-2 ocredit=-1

16. Enabling and Configuring Firewalls: firewalld and ufw

Firewalls are essential for securing Linux servers by controlling incoming and outgoing network traffic based on predetermined security rules. There are two most widely used firewall solutions for Linux are firewalld for RHEL-based distributions and ufw for Debian-based systems.

If firewalld or ufw is not already installed on your system, you can install it using the package manager.

Install Firewalld:

sudo dnf install firewalld
sudo systemctl enable firewalld
sudo systemctl start firewalld

Install Ufw:

sudo apt-get install ufw
sudo ufw enable
sudo ufw status

17. Disabling Ctrl+Alt+Delete on Linux

In most Linux distributions, pressing ‘CTRL-ALT-DELETE’ will take your system to the reboot process. So, it’s not a good idea to have this option enabled at least on production servers, if someone mistakenly does this.

To disable Ctrl+Alt+Delete, create or edit the override file for the Ctrl+Alt+Delete key combination.

sudo systemctl edit ctrl-alt-del.target

Add the following lines to the override file to disable the key combination:

[Service]
ExecStart=

After making changes, reload the systemd configuration and mask the ctrl-alt-del.target ensures that it cannot be triggered:

sudo systemctl daemon-reload
sudo systemctl mask ctrl-alt-del.target

18. Checking Accounts for Empty Passwords on Linux

Any account having an empty password means it’s opened for unauthorized access to anyone on the web and it’s a part of security within a Linux server. So, you must make sure all accounts have strong passwords and no one has any authorized access. Empty password accounts are security risks and that can be easily hackable.

To check if there were any accounts with empty passwords, use the following command.

sudo cat /etc/shadow | awk -F: '($2==""){print $1}'

19. Display SSH Banner Before Login

Displaying a banner message before the SSH login prompt can be a useful way to provide legal notices, warnings, or information to users attempting to access your Linux server.

To set such banners, you need to create a text file that contains the message you want to display.

sudo nano /etc/ssh/ssh-banner

Add your banner message:

***********************************************************************
WARNING: Unauthorized access to this system is prohibited.

All activities on this system are logged and monitored. By logging in,
you acknowledge that you are authorized to access this system and agree
to abide by all relevant policies and regulations.

Unauthorized users will be prosecuted to the fullest extent of the law.
***********************************************************************

Next, you need to configure the SSH server to display the banner before the login prompt.

sudo nano /etc/ssh/sshd_config

Find and modify the Banner directive:

Banner /etc/ssh/ssh-banner

After making these changes, restart the SSH service to apply the new configuration.

sudo systemctl restart sshd

20. Monitor User Activities on Linux

If you are dealing with lots of users, then it is important to collect the information of each user’s activities and processes consumed by them and analyze them at a later time or in case of any kind of performance, or security issues. But how we can monitor and collect user activity information.

There are two useful tools called ‘psacct‘ and ‘acct‘ are used for monitoring user activities and processes on a system. These tools run in a system background and continuously track each user activity on a system and resources consumed by services such as Apache, MySQL, SSH, FTP, etc.

For more information about installation, configuration, and usage, visit the below url.

21. Monitor Linux Logs Regularly

Reviewing logs on a regular basis is an important part of managing and securing a Linux system, as logs provide detailed records of system events, user activities, and potential security incidents.

By regularly checking these logs (usually stored in the /var/log directory), you can identify issues early, respond to security threats, and ensure the system runs smoothly.

  • /var/log/message – Where whole system logs or current activity logs are available.
  • /var/log/auth.log – Authentication logs.
  • /var/log/kern.log – Kernel logs.
  • /var/log/cron.log – Crond logs (cron job).
  • /var/log/maillog – Mail server logs.
  • /var/log/boot.log – System boot log.
  • /var/log/mysqld.log – MySQL database server log file.
  • /var/log/secure – Authentication log.
  • /var/log/utmp or /var/log/wtmp : Login records file.
  • /var/log/yum.log: Yum log files.

22. Backup Files in Linux Using rsync

Backing up files in Linux using rsync is an efficient and reliable method, as it synchronizes files and directories between two locations, making it perfect for backups.

To back up files on the local system, use the following command:

rsync -av --delete /source/directory/ /backup/directory/

To back up files on the remote system, use the following command:

rsync -avz -e ssh /source/directory/ user@remote_host:/backup/directory/

23. NIC Bonding

In Linux, NIC Bonding is a feature that allows you to combine multiple network interfaces into a single bonded interface to improve network reliability, redundancy, and performance.

Below guides, you’ll find a simple explanation of how NIC Bonding works in Linux, including configuration details for the two common modes.

24. Keeping /boot as Read-Only in Linux

The /boot directory in Linux contains essential files needed to boot the operating system, such as the kernel, initial ramdisk (initrd), and bootloader configuration files.

Ensuring that /boot is mounted as read-only can enhance system security and integrity by preventing unauthorized modifications to these critical files.

To do this, open “/etc/fstab” file.

vi /etc/fstab

Add the following line at the bottom, save, and close it.

LABEL=/boot     /boot     ext4     defaults,ro     1 2

Please note that you need to reset the change to read-write if you need to upgrade the kernel in the future.

25. Ignoring ICMP or Broadcast Requests in Linux

In Linux, you can configure your system to ignore ICMP (Internet Control Message Protocol) or broadcast requests to enhance security and reduce unwanted network traffic.

Open the /etc/sysctl.conf file using a text editor:

sudo nano /etc/sysctl.conf

Add or modify the following line to set the ICMP echo ignore flag:

net.ipv4.icmp_echo_ignore_all=1

Apply the changes:

sysctl -p

26. Implement Intrusion Detection and Prevention

To enhance network security, install and configure an Intrusion Detection System (IDS) or Intrusion Prevention System (IPS) to monitor traffic and detect potential attacks.

IDS options like Snort and Suricata analyze network packets for suspicious activity and provide alerts. Snort offers flexible, rule-based detection, while Suricata supports multi-threaded processing and advanced protocols.

For a proactive defense, consider Fail2ban, which detects and responds to suspicious behavior by blocking offending IPs. Each tool can be configured to suit your specific security needs, providing robust protection against intrusions and helping maintain network integrity.

If you’ve missed any important security or hardening tip in the above list, or you’ve any other tip that needs to be included in the list. Please drop your comments in our comment box. TecMint is always interested in receiving comments, suggestions as well as discussions for improvement.

Similar Posts